LACROIX City consists of 650 “smart city” professionals in France and Europe helping local authorities to build the smart roads necessary to secure and streamline all types of mobility and to ensure an ecological balance for our towns and territories.
Communication module LoRa P2P
Communication module LoRa P2P
This module communicates in RF, LoRa point-to-point technology to the SensyCity detection ecosystem composed of SIR Dali, NOD Dali and VIA Dali communicating nodes.
Very small in size, it is equivalent to 2 modules and is easily installed on the DIN rail of the public lighting cabinet.
Easy connection with the control unit.
It is delivered with its vandal proof antenna.
Advantages
- Modular, the LoRa point-to-point communication module allows the evolution of connected management from the cabinet to the light point by RF technology, freeing itself from possible constraints related to electrical installations
- Supports communication with up to 150 SIR, NOD or VIA communicating nodes
- Possibility to mix on the same installation the LoRa radio communication module and the PLC communication module, thus proposing the most appropriate technology according to the infrastructure constraints and the envisaged use case.
Technical specifications
Technical Specifications:
- Casing : IP20
- Materiel : Polycarbonate
- Dimensions (HxLxP) – in mm: 92 x 36.5 x 62, equivalent to 2 modules
Electrical specifications:
- Operation Nominal input voltage range : 12 VDC
- Electric class: complies with Class I and Class II
- Power consumption (standby/max): 0.4 W / 0.9 W
Installation:
- In cabinet
- Standard fixation DIN 35 rail
- Operating temperature : from -25°C to + 50°C
- Humidity: 10-95%.
Communication:
- RJ12 to control unit control
- LoRa P2P – 868 MHz
Norms and Certifications:
- CE Certification: (2014/35/EU; 2014/30/EU; 2014/53/EU)
Environmental protection
Eligible for Energy saving Certificates:
RES-EC-107
> 17,500 kWh cumac x N (number of astronomical clocks)
Astronomical clock for street lighting.
Environmentally friendly design product:
Control unit is 4 times more compact and twice as light as the previous version,
reducing the environmental impact of the production at the end of life.
Lower consumption: 2.5 W.
Compact packaging, made only from cardboard, to facilitate recycling.